Intervention before the fault occurs
The cost of maintenance is known and can be planned; the cost of a breakdown is unknown and always arrives at the worst possible moment. Periodic maintenance is the cheapest way to remove that uncertainty.
The interval is set according to the number of daily cycles and the ambient conditions. Common practice is maintenance once a year for doors running under 50 cycles a day, every six months between 50 and 200 cycles, and every three months above 200 cycles. In dusty, humid or chemically aggressive environments the interval is shortened.
At every visit we record in writing the work performed and the parts replaced. A recurring fault can usually be diagnosed within a few minutes once those records are consulted, and the same records also make your occupational safety audits easier.
Reach us by phone, WhatsApp or the form, and we will route your request to the right team.
For a new system we take the measurements; for an existing fault we diagnose it on site.
Installation, maintenance or repair is carried out on the planned day and time, without stopping production.
Safety devices are tested, user training is given and the area is handed over clean.
High-Speed DoorsFeaturedThe most widely chosen roll-up high-speed door
A roll-up high-speed PVC door that has become the standard for heavy indoor traffic. It works in narrow side clearances, and after an impact the curtain re-seats itself.
View details
Garage DoorsFeaturedInsulation, quiet running and space saving
A door that folds up panel by panel to sit parallel to the ceiling. It takes up no space in front of or behind the opening and provides high thermal insulation.
View details
AutomationSmooth access control at the car park entrance
These systems consist of a motor and a control unit protected by housings made from different materials. Stainless steel housings are preferred for the critical conditions that arise near the sea and in applications requiring heavy use.
View detailsNo, maintenance can also be requested as a one-off visit. We still recommend a regular plan, particularly for doors with a high daily cycle count, because it prevents unexpected downtime.
Maintenance normally takes 30–60 minutes per door. The door is out of service for that period, so we schedule the visit for the hours when traffic through the opening is at its lowest.
Yes. We provide periodic maintenance, genuine spare parts supply and fault repair for door and automation systems of any brand and model.
Other services
Tell us briefly about your situation; we'll bring in the right team with the solution that fits.
